High strength, medium viscosity, anaerobic adhesive L2680
Elite-L2680 is one-component, medium viscosity, high strength anaerobic cylinder-components curing agent hardening with excellent chemical resistance. The product is applied between two close metal surface, curing under the condition of air isolation.
The product is applied to fix and assemble bearings and sleeve matching components. It is used to cure the cylinder components whose maximum clearance diametral is 0.25mm. L2680 is applied to clearance fit and fit drivepipe, belt pulley, gear, rotor, repairing holes, axle bearings and other components.
- Bonded material:
- Tensile strength(n/mm2):
- Primary fixation time(s):10min
- Temperature range(℃):-55-150
- Shore hardness(D):
- Application:Fix and assemble bearings and sleeve matching components. Applied to clearance fit and fit drivepipe, belt pulley, gear, rotor, repairing holes, axle bearings and other components.
|The property before curing|
|Viscosity at 25℃||mPa·s||GB/T2794-1995|
|Flash point (℃)||
|Maximum filling gap(mm):||0.25|
|Primary curing time (min)||10||10-30|
|Entire curing time at room||24|
|Breaking momentN.m||15 1||5-30|
|Average disassembling moment (N.m)||20||20-40|
|Static Shear strength（MPa）||
The product was applied to metals.